C5 CORVETTE ARMS

C5 CORVETTE ARMS

 

C5 CORVETTE TUBULAR REAR CONTROL ARMS

 

These control arms are designed to clear a 15'' double beadlock wheel with a backspacing of 7.75'' or less. They are manufactured entirely from 4130 and 4140 chromoly tubing and plate. They are completely TIG welded and stress relieved. Axle loops are included with the arms and can be unbolted for easy installation/removal of the axles. The arms are sold with new AC-Delco ball joints installed and Aurora XAM-10T three piece heim joints. All of the necessary spacers and hardware is supplied to bolt directly to the stock C5 subframe. The eccentric bolt is replaced with a stationary bolt to prevent accidental camber changes. Drop stop cables are also supplied to limit downward suspension travel.

The following parts must be installed in conjunction with these arms to clear a 15'' double beadlock rim:

  • Farks Supercars 15'' C5 Spindle with brakes.

  • Afco (or similar) coilover shocks with coil over conversion pieces. Part number: 3840SP

  • Afco (or similar) springs, part number: 28350-1CR (350 lbs/in, 8'' long springs)

  • Pfadt C5 Rear Drag Bar with the endlink in the innermost hole. (stiffest setting)

 

Retail price $1550

Call (718) 680-9020 to order

Dealer pricing is available

 

These control arms are designed for off-road drag race use only. They are not designed for street use, nor have they been tested in street conditions. They should not be installed on any vehicle that is registered for street use.